Example high speed video movies

(lots of them, so this page cuold load a bit slow!)
Note: A one minute high-speed video can easily take 900MB. The samples below have been compressed for the website.

NEW: Follow us on our YouTube channel to remain up to date (don't forget to press the subscribe button to keep in touch for training and updated videos!):
 

The Cyclocam high speed camera Youtube DEMO list

Take a look at the selected videos on this playlist to get a good understanding of the Cyclocam high speed camera!

 

The Cyclocam high speed camera Youtube TRAINING list

This is our first attempt to record a training session: a colection of short "how-to"-videos for beginners and for advanced users!
Note that the (bad) sound quality is still in BETA-version - we are still recording the voice-over!

 
If you prefer to search for a specific manufacturing or production reference movie, below is a sample of videos to get an idea.
If you don't find a reference movie, please get in touch with us through the contact page, we might have it available anyway!

Labeler - Cyclocam hi-speed camera, close-up, 500 fps (slow motion video)

Note how the hook is damaging the labels at this production line!
Do you want to improve your quality on the production line?

 
 

Solving timing issues - Cyclocam hi-speed camera close-up at 1000 fps, (slow motion video)

Cyclocam close-up at 1000 fps. Note how the pen is shot into the stream of cheese to stack them by the right packing quantity. With the Cyclocam, you can exactly measure how many microseconds you need to delay the pen to stop unplanned shutdowns due to smashed cheese!
Do you want to enable your technicians to do even better than trial and error? Get them the right tools!

 

Plastic foil issues - Cyclocam - ultra hi speed camera fragment at 1000 fps

Cyclocam in action at 1000 fps. Note how the foil is curbing way too much on the right side of the machine, causing unexpected stops at higher speeds.
With the Cyclocam, you can finally see what is happening ... like you would use a magnifying glass to look at small print, you use a cyclocam to look at moving items!

 

Food - Sweets flowsealing - note afterfall - Cyclocam hi-speed camera, slow motion video

Increasing the speed of your production line is hard if you don't know what the real bottleneck is.
You could use trial & error ...
or you could use a Cylclocam to enable your technicians to SEE what is the bottleneck!
Here you can SEE that there is afterfall, so the bottleneck would not be here, but at the valve above the machine!
Easy to use, industrial device, in real time!

 

Beer - fillingstation - 60 000 bottles per hour - Cyclocam hi-speed camera, (slow motion video)

Solving filling station issues can be hard as the bottles just move to fast to really see what is happening.
With the Cyclocam, you can finally see what is happening ... like you would use a magnifying glass to look at small print, you use a Cyclocam to look at moving items!

Beer - fillingstation 2- 60 000 bottles per hour - Cyclocam hi-speed camera, (slow motion video)

Solving filling station issues can be hard as the bottles just move to fast to really see what is happening.
With the Cyclocam, you can finally see what is happening ... like you would use a magnifying glass to look at small print, you use a Cyclocam to look at moving items!
Easy to use, industrial device, real time!

 

Beer - closing cap machine 60 000 bottles per hour - Cyclocam hi-speed camera, slow motion video

Based on 10 years of experience in the troubleshooting of filling lines, the Cyclocam is now used by major cola & beer bottlers.
With the Cyclocam, you can finally see what is happening ... like you would use a magnifying glass to look at small print, you use a Cyclocam to look at moving items!

Regular camera: closing cap machine 60 000 bottles per hour

This is how a very experienced eye can look at the production line. Note that this is filmed at 50fps, while an average human eye can only see 25 fps!
If you would use the Cyclocam, you could see what is happening ... like you would use a magnifying glass to look at small print, you should use a Cyclocam to look at moving items!

 

Filler - exploding bottle in second 00:12

Movie recorded at beer bottling site, enabling clear communication accross production, technical management, the equipment supplier and the bottle supplier.

 

Tune your Pick & Place robot for better performance and lower energy consumption

This pick & place robot could be better tuned if you correct the vacuum setpoints.
As you can see in this video, the vacuum starts way too early, not only causing additional damage to the product, but also additional energy consumption.
Check out www.cyclocam.be for a solution!

 

Food - Cyclocam hi-speed camera, slow motion video

Increasing the speed of your production line is hard if you don't know what the real bottleneck is.
You could use trial & error ...
or you could use a Cylclocam to enable your technicians to SEE what is the bottleneck!
Like you would use a magnifying glass to look at small print, you use a Cyclocam to look at moving items!
Easy to use, industrial device, real time!

Regular camera: food machine

This is a normal film of a production line.
Note that this is filmed at 50fps, while an average human eye can only see 25 fps!
If you would use the Cyclocam, you could see what is happening ...
like you would use a magnifying glass to look at small print, you should use a Cyclocam to look at moving items!

 

Cutting metal - Understand it ... while it happens - Cyclocam hi-speed camera, slow motion video

Increasing the speed/quality of your production line is hard if you don't know what the real problem is.
Enable your technicians to SEE what is happening, using a Cyclocam on moving items, like you would use a magnifying glass to look at small print!
Easy to use, industrial device, in real time!

 

Tuning your robot = measure the timings you need - Cyclocam hi-speed camera, slow motion video

Tuning your robot to Increase speed of your production line is hard if you don't know the exact timings of the movements.
Usually, we would use trial & error...
but when it gets critical, we need to see what is happening, and measure it.
With a Cyclocam you can SEE ... and measure in microseconds between two positions of your robot!

 

Carton Folding device - tuning opportunity for higher speeds!

Based on attached Cyclocam video, you can investigate if the folding block could appear 0.32 seconds earlier, allowing a significant production speed increase!
Do you want to check your own equipment as well?
Check out www.cyclocam.be for a solution!

 

Carton lid closer - Cyclocam hi-speed camera close-up, (slow motion video)

Cyclocam filming the closing of a small carton package. It is important to film good working devices to have benchmark material in case your device starts to deteriorate.
With the Cyclocam, you can finally see what is happening ... like you would use a magnifying glass to look at small print, you use a cyclocam to look at moving items!

 

PET-blowing - Cyclocam hi-speed camera close-up, (slow motion video)

Cyclocam filming a PET blowing installation in hi-speed images. It is important to understand good working devices and to have benchmark material in case your device starts to deteriorate.
With the Cyclocam, you can finally see what is happening ... like you would use a magnifying glass to look at small print, you use a Cyclocam to look at moving items!

 

Solving broken glass issues - Cyclocam hi-speed camera, (slow motion video)

Cyclocam filming a glass container filling installation in hi-speed images. It is important to understand good working devices and to have benchmark material in case your device starts to deteriorate.
With the Cyclocam, you can finally see what is happening ... like you would use a magnifying glass to look at small print, you use a Cyclocam to look at moving items!

 

Cyclocam Macro Image - Bearing clip

Understanding what exactly happens in your equipment is crucial to really improve your line.
Check out this macro-image from a bearing manufacturer to understand how this device works!
Check out www.cyclocam.be for a solution to also understand your own equipment!

Cyclocam Macro Image bearing - clip 2

Check out this process!

Understanding how your material behaves is crucial to develop solutions for your production challenges.
Use a magnifying glass for really seeing small print, and use a cyclocam for really seeing moving images!

 

Bottling and labeling issues resolution

Look how the labels are clamped to hard in the equipment.
Adding a softer clamp and an airflow guidance will significantly reduce the issues with this labeling machine!

Champagne Bottles - Optimization of the end of a filling line

As you can see, the Cyclocam can easily handle several lenses.
This is filmed using a 108 mm zoom lens with a LEDring for additional light.
Tuning this bottleneck is critical to enable speed increases!

 

Labeling equipment - Cyclocam in action

Visually see what is happening while the line is running ... at full speed!

 
Production challenge?
See the essence: save time and money
  Understand your manufacturing equipment
  Key differences vs. other cameras
  Technical features
References
Support & Distribution
Example Movies
Try the on-line demo
About us & How to contact us
Request the Cyclocam software
line
 
 
@Cyclocam Tweets